APXII-1200
Amplifier for intensive use
- Output power 2 x 400W@ 8-ohm / 2 x 640W @ 4-ohm
- Built-in compressor-limiter
- Mode selector: stereo, bridge & parallel
- Built-in surge protection
- Input & Output XLR/TRS connectors for signal routing
- Description
- Additional information
- Downloads
Description
APX-II 1200 is a power amplifier with an output power of 2 x 400W @ 8-ohm / 2 x 640W @ 4-ohm and a built in compressor-limiter to protect your speakers. The amplifier comes with a stereo, bridge mono and parallel mono mode selector and built-in surge protection. On the rear, APX-II 1200 provides XLR input & through connectors for signal routing and speakon connectors for output wiring.
Additional information
| Output power - Stereo 8-Ohm | 2 x 400W |
|---|---|
| Output power - Stereo 4-Ohm | 2 x 640W |
| Output power - Bridge 8-Ohm | 1 x 1280W |
| Input impedance | 10kOhm balanced to ground |
| Frequency response | 15Hz~25kHz |
| THD | <0.03%, +4 dBu @ 1 kHz, gain unit |
| Slew Rate | 40V/uS |
| Signal to noise ratio | >102dB |
| Damping factor (1kHz@8Ohm) | >400:1 |
| Protections | Full short-circuit, Open-circuit, Thermal, Soft-Start, DC voltage, Sub/Ultrasonic and RF |
| XLR Connectors | 2 XLR female balanced |
| TRS Connectors | 2 6,35 mm. TRS Plug |
| Output | 2 Speakon loudspeaker outputs |
| Terminals | 2 pairs |
| Input sensitivity selection | 0.77V / 1.0V / 1.44V |
| Selection mode | Parallel, Stereo, Bridge |
| Ground | Lift & Gnd |
| Cooling | 2 Front-to-back via 2 variable-speed fans |
| Voltage range | AC100–240V, 50-60Hz |
| Max. Consumption | 1200W |
| Dimensions (mm) | 482x369x88,8 |
| Weight | 14 Kg. |
