ICE-3200
Professional amplifier
- Class TD amplification
- 2 x 800W @ 8-Ohm
- 2 x 1200W @ 4-Ohm
- 2 x 1600W @ 2-Ohm
- YsProcessing
- Description
- Features
- Additional information
- Downloads
Description
ICE SERIES is a professional amplifier series that features TD class amplification, which combines the efficiency of a digital power supply with the sound clarity of a high-quality analog amplification circuit. Thanks to its design, this amplifiers allows the peak power to follow the dynamics of the music program, being able to reproduce – at its peak – up to twice the RMS power without clipping. ICE-3200 has an output of 2 x 800W @ 8-ohm, 2 x 1200W @ 4-ohm and 2 x 1600W @ 2-ohm in stereo mode and 1 x 3200W @ 4-ohm in brindge mode.
TD Class amplification
Thanks to the combination between its power supply and its analog amplification circuit – fundamental for sound clarity – the ICE Series successfully incorporates the TD class type achieving a perfect combination between power consumption, weight and audio quality.
YSProcessing
ICE Series incorporates to its design an audio process called YSProcessing, that adds low-frequency compensation to enhance speaker output. The user can switch it ON/OFF on its rear panel, boosting the signal whenever its necessary.
Additional information
| Output power - Stereo 8-Ohm | 2 x 800W |
|---|---|
| Output power - Stereo 4-Ohm | 2 x 1200W |
| Output power - Stereo 2-Ohm | 2 x 1600W |
| Output power - Bridge 8-Ohm | 1 x 2400W |
| Output power - Bridge 4-Ohm | 1 x 3200W |
| Amplification | Class TD |
| Input impedance | >10 kOhm |
| Frequency response | 20Hz~20kHz |
| Damping factor (1kHz@8Ohm) | >800:1 |
| Signal to noise ratio | >95dB |
| YsProcessing | The amplifier adds low-frequency compensation to enhance speaker output |
| Protections | Short & open circuit, thermal, RF protection, On/off muting, DC fault shutdown & active inrush limiting |
| Signal connectors | Balanced male XLR-3 & balanced female TRS/XLR-3 combo per channel |
| Output connectors | 2 Speakon |
| Output terminals | 2 pairs |
| Input sensitivity selection | 0.77V / 1.0V / 1.44V |
| Selection mode | Parallel, Stereo & Bridge |
| Cooling | Two Front-to-back fans, temperature-controlled speed |
| Voltage range | AC100–240V, 50-60Hz |
| Max. Consumption | 2400W |
| Dimensions | 483x361x88,8 mm. |
| Weight | 9.7 Kg. |
